-
- Valves
- Double Offset Butterfly Valves
- A butterfly valve is a valve that can be used for isolating or regulating flow. It is quarter turn valve. This valve has two offsets which creates a cam action during operation to lift the seat out of the seal resulting in less friction and decreases its tendency to wear. This type of valves can be used in • Oil…
-
- Valves
- Dual Plate Check Valves
- The dual Plate check valve is an all-purpose non return valve that is much stronger, lighter in weight and smaller in size compared to a conventional swing check valve. The Dual Plate Check Valve employs two spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by torsion spring action without requiring reverse flow. This…
-
- Valves
- Floating Ball Valve(Cast)
- Ball valves are quarter-turn, straight-through valves that have a round closure element with matching rounded seats. The valve are manufactured with 2 piece ,3 piece and 1 piece design with flanged /screwed / welded ends. The Valve are provided with antistatic device, blowout-proof stem. Ball Valve Provides Superior ease of operation and has high resistance to leakage. This type of…
-
- Valves
- Forged Floating Ball Valves
- Ball valves are quarter-turn, straight-through valves that have a round closure element with matching rounded seats. The valve are manufactured with 3 piece design with Screwed / Buttweld / SocketWeld / Flanged ends .The Valve are provided with antistatic device, blowout-proof stem. Ball Valve Provides Superior ease of operation. This type of valves can be used in Oil and gas…
-
- Valves
- Globe Valve
- A Globe valves is a linear motion valve and is primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flow path or it can completely close the flow path. Globe valve usually has rising stem, and the larger size is of the outside screw-and-yoke construction. This type of valve…
-
- Valves
- Swing Check Valves
- A check valve or non-return valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. In Swing Check Valve, the disc is the movable part to block the flow, which swings on a hinge. This type of valves can be used in Oil and gas Water Pipeline Chemical
-
- Valves
- Triple Offset Butterfly Valves
- Triple eccentric (offset) Design prevents galling and scratches between the metal seat and the metal disc due to its unique design. The only time where the seal comes into contact with the seat is at the point of complete closure. It is quarter turn valve. This type of valves can be used in Oil and gas Water Pipeline Chemical
-
- Valves
- Trunnion Mounted Ball Valves
- A trunnion mounted ball valve has additional mechanical anchoring of the ball at the top and the bottom, suitable for larger and higher pressure valves. These ball valves are quarter-turn. The valves are manufactured with 3 piece and 2 piece design with Flanged end. The Valves are provided with antistatic device, blowout-proof stem and Double Block and bleed. These type…
-
- Valves
- Wedge Gate Valves
- A Gate Valve, or Sluice Valve, as it is sometimes known, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. They are used when a straight-line flow of fluid and minimum flow restriction are needed. When fully open, the typical gate valve has no obstruction in the flow path, resulting…
